The Portable Battery Box done right.
After years of development and testing we are proud to present to you the most advanced portable battery system on the market. By comparing similar products and listening to what you wanted, we've developed a product with a seamless experience so that you can take the comforts of home wherever you go.
The TP-1000DUAL is the best in the range. It includes all the standard features, and incorporates additional features including Lithium (LiFePO4) battery compatibility, an unchallenged 1000 Watt Pure Sine Wave Inverter with a staggering 2000 Watt peak power, timer and usage logs to better help with monitoring battery usage, and DUAL BATTERY setup capability.
Features at a glance
1 - 1000W Pure Sine Wave Inverter (with 2000W peak power)
2 - 240V Mains Input for charging your ToughPower
3 - 2-Pin Input for charging via 12V nominal Solar Panels
4 - 4-Pin Input for charging via car CIG Socket
5 - Anderson Input for Dual Battery setup - Bulk charging via car alternator. [More info]
6 - High Current 50Amp protected 12VDC Anderson Output
7 - 15Amp protected 12VDC CIG Socket Output
8 - 15Amp protected 12VDC Engel Socket Output
9 - 15Amp protected 12VDC Merit Socket Output
10 - 2 x Independent fast-charging USB ports
11 - LCD touch-screen interface
12 - LED light strip
The electronics inside the lid
MPPT Controller
Any 12V nominal Solar Panel - Regulated or Unregulated can be connected to the ToughPower. The ToughPower automatically senses unregulated Solar Power and switches on the internal MPPT Controller.
AC-DC 10A Mains Charger
A powerful 10Amp Mains Charger is fully integrated into the internal electronics. This means the battery can be fully charged in less than one night!
10A Multi-Stage DC-DC Charger
The ToughPower can be charged using the provided Accessory cable attached to the CIG Socket of your car. With an integrated DC-DC Charger inside the lid, the ToughPower will regulate the current ensuring that no more then 10 Amps is drawn.
Dual Battery Bypass Controller - Direct Alternator Bulk Charge & DC-DC Charging
This utilises the car's alternator to provide power to the ToughPower Battery during the BULK charging stage, maximising charging speed. The ToughPower then switches to the internal DC-DC to finish the charging, helping the battery reach its full capacity and maximising battery life.
Low Voltage Shutdown and Recovery Technology
When the battery voltage is low the Power Outlets are automatically SHUTOFF to isolate & protect the battery from damage AND the Charging Inputs remain OPEN to accept charging power as soon as it becomes available (eg starting the car or the sun touching the Solar Panels). No annoying alarms in the middle of the night, and a hands free recovery if you have a Solar Panel attached.
Car Alternator BULK Power supply to Inverter
Utilise the power from your vehicle's alternator for the ToughPower's 1000W Pure Sine Wave Inverter to save the ToughPower's charge - or if you run the ToughPower flat - and instantly use the ToughPower at its FULL capacity! Meanwhile, the ToughPower's LCD screen will keep you updated on the current load and drain of the battery.
Full Electronic Battery Protection
The ToughPower includes over temperature protection, over voltage protection, and low voltage protection during both charging and usage via the integrated electronics inside the Lid. The LCD screen displays alerts when an over temperature or low voltage condition occurs.
Where to buy
Click here to see the retailers stocking the ToughPower, and follow us on Facebook to be alerted when new retailers are stocking the ToughPower!
If you're a retailer and looking to stock our products, contact us and we can discuss your needs.
More Information
To view more in depth information, click a link below or view the brochure.
Charging Outlets LCD Screen Safety FAQs ToughPower